Strong Foundations. Superior Results.
Structural roof framing engineered to carry Northwest rain, wind, and snow loads on new builds and additions.
You may be planning a new roof structure, an addition, or a repair after noticing a sagging ridge, a bowed rafter, or a roofline that no longer looks straight. Either way, the framing underneath decides how the roof carries its load and sheds water.
Roof framing is the rafters, trusses, ridge, and bracing that hold the roof up. Washington Construction frames roofs for Stanwood homeowners, and this page explains what in Stanwood's climate and housing stock should shape your plans.
Framing problems usually come from three sources: moisture, load, and movement. Water that gets past the roofing can soak rafters and sheathing over time. Heavy loads from wind or snow push on members that were undersized or poorly connected. Movement from settling or earlier alterations can leave a roof out of line.
Rain is the first local factor. Stanwood averages about 109 days a year with 0.1 in or more of rain, based on Daymet data from 2005 to 2025. That is a lot of wet days. Framing work needs the structure dried in quickly, and open framing and exposed sheathing are best scheduled with the wet months in mind. If we open a roof for repair, we also look at the wood for moisture damage before building on it.
Wind is the second factor. In the forecast zone that includes Stanwood, there were 37 high and strong wind episodes from 2005 to 2025. This matters for how the roof is tied together. Connections between rafters, walls, and bracing carry wind forces, so they deserve as much attention as the lumber sizes.
Snow is a smaller concern. Stanwood averages 7.2 in of snowfall per season. That is modest, but your roof design should still account for the loads the structure must carry.
Home age also plays a part. About 46% of housing units in Stanwood were built from 1990 to 2009, according to the Census ACS for 2020 to 2024. Those homes are now roughly 15 to 35 years old. At that age, a roof may be due for a closer look at old leaks, past patch work, or framing that was altered for vents or skylights. This describes the local housing mix, not the condition of any one house.
The work itself starts with assessing what is there. Then we remove damaged members, or lay out new framing for an addition or a new roofline. We set rafters or trusses, brace them, and prepare the structure for sheathing. Washington Construction gives a 1-year warranty on labor.
A city near the mouth of the Stillaguamish River in northwest Snohomish County, near farmland and the coast.
Engineered for regional wind and snow loads; Correct slope for rain shedding; Solid base for decking and roofing; Precise lines and overhangs; Built to Washington structural code