Strong Foundations. Superior Results.
Ultra-durable porcelain countertop installation with slim profiles, heat resistance, and highly realistic stone looks.
Porcelain countertops are mostly an indoor job, but in South Prairie the weather still shapes it. The town gets about 136 days a year with 0.1 in or more of rain (Daymet, 2005-2025). That means wet boots, wet slabs and muddy floors on delivery and install days.
Planning for that helps the work go cleanly. Below is how a porcelain countertop install runs, and where local conditions change what you should do before and during the job.
Porcelain slabs are dense, thin and heavy. They need careful handling and a flat, well-supported base. Here is the work in plain steps.
The cabinets are checked for level and strength. Sink, cooktop and seam locations are marked. Porcelain is cut to fit, and cutouts are planned so corners are not weak points.
With about 136 days a year of 0.1 in or more of rain in South Prairie, per Daymet, plan the path from the driveway to the kitchen. Lay down floor protection and keep the entry dry. Wet, muddy footing makes it harder to carry a heavy slab safely.
Existing countertops come out, along with the sink and any fixtures in the way. Plumbing and appliances are disconnected first. The cabinet tops are checked and shimmed where needed.
Slabs are dry-fitted, then bonded to the cabinets. Seams are kept tight and aligned. Edges are finished to the profile you chose.
The sink, faucet and appliances go back in. Seams and joints are sealed where the material calls for it, and the work area is cleaned.
South Prairie sees about 37 days a year that freeze at night and thaw by day, per Daymet. That matters most if slabs are stored in a garage or outbuilding before install. Let them come to room temperature indoors before they are cut or set. It also matters for an unheated cabin or second home, where large temperature swings can stress any rigid surface.
Washington Construction, based in Bothell, WA, gives a 1-year warranty on labor for this work.
A very small town in the foothills of southeast Pierce County near the Carbon River.
Extremely hard, scratch-resistant surface; Nonporous and stain-resistant with no sealing; Heat and UV stable for indoor or covered outdoor use; Slim, modern profiles; Highly realistic stone and concrete looks