Strong Foundations. Superior Results.
See-through fireplaces that share warmth and a glowing flame between two rooms.
The best time to plan a double-sided fireplace in Snohomish is late summer or early fall. Framing, venting and finish work are easier to schedule before the wet months, and you want it running before the heating season starts.
A double-sided unit opens into two rooms at once, so it changes more of the house than a single-sided one. Washington Construction, based in Bothell, WA, installs them. Here is what to think through before you start.
Start with the wall. A double-sided fireplace sits between two spaces, such as a living room and a dining room, or a bedroom and a bath. That wall must be able to hold the unit, the chase and the finish on both faces. Decide early which rooms will share it, because the layout drives everything else.
Fuel type is the next choice. In Snohomish, about 33% of homes are heated mainly with utility gas, and 0.7% mainly with wood, per the Census. Those figures describe local heating habits, not what suits your house. They do suggest gas is the more familiar setup here. Whether you choose gas or wood, the venting path, clearances and fuel supply shape the scope.
Home age also matters. About 52% of housing units in Snohomish were built before 1980, per the Census ACS 2020-2024, and that figure includes apartments. If your home is from that era, expect to open walls, floors or ceilings and see what framing and wiring are behind them. Homes built before 1978 may also have lead paint, which changes how demolition is handled.
What affects scope most:
The vent route through the roof, the structural work around the opening, the finish on two faces, and any gas line or electrical work. Each one adds steps. A fireplace placed near existing framing and a roof exit is simpler than one that needs a long vent run.
Expect a sequence of layout, framing, unit set, venting, then finishes such as stone, tile or drywall. Some days will be loud and dusty. Work on the roof is weather dependent, which is another reason to avoid the wettest months.
Financing is available, subject to credit approval, if you want to spread out the cost of a larger project.
One practical tip: before you pick a unit, decide the finish and mantel height for both rooms. The two sides rarely suit the same design, and settling that first avoids changes after the framing is done.
A historic city on the Snohomish River known for its antique district and river valley setting.
Shares warmth and flame across two rooms; Preserves open sightlines between spaces; Balanced surrounds finished on both faces; Proper venting and clearances for a see-through firebox