Strong Foundations. Superior Results.
We install new exterior siding that shields Western Washington homes from wind-driven rain and constant Puget Sound moisture.
Most people start looking at siding when they see it failing. Boards cup or crack. Paint peels. A stain shows up below a window, or the wall feels soft near the ground.
If that sounds familiar, a siding installation in Milton may be the next step. Washington Construction gives free estimates, so you can have the wall looked at and learn what the job would involve before you decide anything.
Siding is the outer layer that sheds water. When it fails, water gets behind it. That is what drives most replacement jobs. Gaps at joints, split boards and worn caulk let moisture reach the sheathing and framing underneath.
Milton sees about 112 days a year with 0.1 inch or more of rain, based on Daymet data for 2005 to 2025. That is a lot of wetting. Walls here need to dry out between storms, so flashing, gaps at trim and the layer behind the siding matter as much as the boards you see.
Daymet also shows about 28 days a year that freeze at night and thaw by day. Water that gets into a small crack can freeze, expand and widen it. Over many cycles, a minor flaw can become an opening. Checking caulk lines, butt joints and board ends is worth doing before a wet stretch.
Census ACS data for 2020 to 2024 shows about 35% of housing units in Milton were built before 1980. That figure includes apartments, so it says little about any one house. Still, if yours is from that era, expect the crew to look closely at what is under the old siding. Older walls may have rot, outdated wrap or no moisture barrier. Homes built before 1978 may also have lead paint, which changes how old material is removed and handled.
Wet-weather months can slow exterior work, so timing is worth discussing during the estimate. Bring photos of any stains or soft spots you have noticed. They help point the inspection to the right walls.
A small city on the King and Pierce county line between Federal Way and Fife.
Blocks wind-driven rain from reaching the structure; Improves energy efficiency with a continuous drainage plane; Boosts curb appeal and resale value across Puget Sound markets; Backed by manufacturer and workmanship warranties; Installed to WA code with permits and inspections handled for you