Strong Foundations. Superior Results.
Elegant crown molding installation that adds architectural height and refinement where walls meet the ceiling.
You look at the line where your walls meet the ceiling and it feels unfinished. Maybe the corner is a plain hard edge, or an older gap and crack show up every time the light hits it. Crown molding is the usual fix for both.
Washington Construction installs crown molding in Lynnwood homes. This page explains what shapes the job here, how the work goes, and what to settle before any trim is cut.
Crown molding looks simple, but the wall-to-ceiling joint is rarely square. Walls lean, ceilings sag a little, and corners are seldom a true angle. Those small errors are why gaps show up in trim that was cut to the textbook angle. A good installation measures each corner and fits the pieces to it.
Local weather matters because wood moves with moisture. Lynnwood gets about 104 days a year with 0.1 in or more of rain, per Daymet data for 2005-2025. About 80% of the yearly precipitation falls from October to April. Indoor humidity tends to follow those wet months. Wood trim swells a little when the air is damp and shrinks when the heating runs and the air dries. If molding is nailed up tight and caulked right away, joints can open or caulk lines can crack later. Letting the material sit inside the house before cutting is standard practice, and so is choosing the right material for the room. Paint-grade MDF and primed wood move differently, and a bathroom is a different case from a living room.
The age of the house changes the prep. The Census ACS for 2020-2024 shows about 53% of Lynnwood housing units were built before 1980. That figure includes apartments, so it says little about any one house. Still, if your home is from that era, expect ceilings that are not flat and walls that are not plumb. Homes built before 1978 may also have lead paint on old trim or walls. Sanding or cutting into painted surfaces in those homes calls for care, so ask about it before work begins.
The work itself runs in a plain order:
Washington Construction gives a 1-year warranty on labor. If a joint opens in the first season of heating and damp weather, that coverage applies to the labor. Tell us about any rooms with a history of moisture or cracking when you describe the job.
A commercial and residential hub in southwest Snohomish County near I-5 and I-405.
Correct spring-angle cuts for seamless corners; Coped joints that stay closed through humidity changes; Layered build-ups scaled to your ceiling height; Straight, level runs even over settled framing; A dramatic, high-value upgrade to any room