Strong Foundations. Superior Results.
We install whole-house and point-of-use water filtration and softening systems for cleaner, better-tasting water.
You turn on the tap and notice a taste, a smell, or a film on the glass. Maybe you see spots on dishes or buildup around the fixtures. Those are the usual reasons homeowners in DuPont start looking at a water filtration system.
Washington Construction installs whole-house and point-of-use filtration. The work touches plumbing, and sometimes electrical, so it helps to know what drives the problem and what the installation looks like before you pick a system.
Water quality complaints usually trace back to one of a few sources. Chlorine or other treatment byproducts affect taste and smell. Minerals cause spotting and scale. Sediment can come from the supply line or from old pipe interiors. A filter is chosen to match the problem, so a water test or a review of your utility's published quality report is a sensible first step. Without knowing what you want removed, it is hard to pick the right system.
Housing age matters here, but only in a limited way. About 14% of housing units in DuPont were built before 1980, per the Census ACS for 2020-2024, and that figure includes apartments. So most homes are newer than that. Still, if yours is among the older ones, we would look at the pipe material where the filter will tie in. Older galvanized or mixed piping can shed sediment, and it affects how the connections are made.
Winter weather also plays a part. DuPont sees about 40 days a year that freeze at night and thaw by day, according to Daymet. A filter housing holds water, and cold can damage it. If the main line enters through a garage, crawl space, or an exterior wall, the install location should be somewhere protected from freezing. Indoor placement near the main shutoff is typical for that reason.
Heating is another point. Utility gas is the main heating fuel in 54% of DuPont homes, per the Census. If your water heater is gas, we plan the filter on the cold-water main before the heater, so both the heater and the fixtures receive filtered water. We also leave room around the heater and its venting.
The work itself is plain. We locate the main, shut off the water, cut in the bypass and shutoff valves, mount the filter housing, and check for leaks. Some systems need a drain connection or an electrical outlet, such as UV or softening units. Our own crews handle the plumbing and electrical work. It is not subcontracted. Labor carries a 1-year warranty.
A small planned city in southwest Pierce County near Puget Sound and Joint Base Lewis-McChord.
Cleaner, better-tasting water throughout the home; protects fixtures and appliances from scale and sediment; systems sized to maintain strong household pressure; bypass and service access simplify maintenance; solutions matched to well or municipal water