Strong Foundations. Superior Results.
We sister reinforcing members alongside weak or damaged joists to restore strength and flatten bouncy floors.
This page is for Beaux Arts Village homeowners whose floors bounce, sag, or slope, or whose crawl space inspection found cracked, notched, or water-damaged joists. It also fits anyone planning to remove a wall or add a heavy fixture over an existing floor frame.
Joist sistering means fastening a new joist alongside a weak one so the two work together. Washington Construction, in business for 22 years, can look at the framing and explain which approach fits your floor. Below, we compare the main options.
Not every weak joist needs the same fix. The right choice depends on what is wrong with the joist and how much of it is sound. Here are the main approaches a homeowner can choose between.
A new joist, usually the same depth as the old one, runs the full span next to the damaged joist. It is fastened with construction adhesive and bolts or structural screws. This suits joists that are undersized, sagging, or cracked along their length. It adds stiffness across the whole span.
When damage is limited to one area, such as a notch for a pipe or a split near a bearing point, a shorter sister can cover just that section. It must extend well past the damage on both sides. It costs less lumber and labor, but it only helps where the original joist is otherwise sound.
If rot or insects have gone through a joist, sistering onto it is not a good fix. A fastener needs solid wood to hold. In that case the joist may need to be cut out and replaced, with the cause of the moisture dealt with first.
Beaux Arts Village sees about 101 days a year with 0.1 in or more of rain, per Daymet data from 2005 to 2025. Damp crawl spaces are a common source of joist rot in wet climates, so we would check moisture, vapor barriers, and drainage before adding new lumber. If moisture is the cause, sistering alone will not last. That points toward replacement or a moisture fix first.
FEMA rates earthquake risk in Beaux Arts Village as Relatively High on its National Risk Index. That is a risk rating, not a prediction. It is still a reason to look at how floor framing connects to beams and walls while the crawl space is open.
Things to settle before work starts:
A very small residential town on the east shore of Lake Washington, surrounded by Bellevue.
Weak or damaged joists reinforced to full strength; Bouncy, sagging floors stiffened and flattened; Full-length sisters that share the span’s load; A targeted fix that avoids replacing whole floors; Moisture cause addressed where rot is present