Strong Foundations. Superior Results.
We construct home theaters with the acoustics, wiring, and seating for a true cinema experience.
A home theater is an interior project, so it does not depend on dry weather the way a deck or siding job does. Many Tacoma homeowners start planning in fall, when the rainy months push people indoors and the room will be ready for winter evenings.
Washington Construction has been in business for 22 years and builds home theaters inside existing homes. This page covers how to plan the room, what changes the scope, and what to expect once work begins.
Start with the room itself. A basement, a bonus room and a spare bedroom each bring different challenges for sound, light and wiring. Decide where the screen goes, how many seats you want and how deep the room needs to be. Those choices drive almost everything else.
About 64% of Tacoma housing units were built before 1980, per the Census ACS 2020-2024, and that figure includes apartments. If your house is from that era, expect to open walls or ceilings and see what is inside. Older framing may not follow today's layouts, and wiring may need attention before new equipment is added. Homes built before 1978 may also have lead paint, which changes how demolition and sanding are handled. Only about 17% of units were built from 1990 to 2009, so a newer house is the less common case here. Those homes are now 15 to 35 years old and can still need updates.
Sound control is the biggest factor. Extra wall layers, insulation and a solid door reduce noise leaking into the rest of the house. Lighting, ceiling height, seating risers, and the number of speaker and cable runs all add work. A room that needs new electrical circuits or ventilation is a larger job than one that only needs finishes.
Work usually moves in stages: framing and rough wiring, insulation and drywall, then paint, flooring and trim. Equipment installation comes last. Expect dust and noise in the middle stages, so plan where the household will spend time. About 56% of occupied homes in Tacoma are owner-occupied, per the Census. If you rent, get your landlord's approval before any structural or wiring changes.
One practical tip: choose your screen, projector and speakers before framing starts. Their sizes and wiring paths decide where walls, outlets and blocking go, and changing them later means reopening finished walls.
The Pierce County seat and a major port city on Commencement Bay of Puget Sound.
Soundproofed walls and ceilings for immersive audio; Pre-wired surround sound and projector infrastructure; Tiered seating platforms for clear sightlines; Programmable lighting and blackout finishes; Clean cable management for a polished look