Strong Foundations. Superior Results.
Water damage drywall repair removes ruined board and restores walls after leaks or flooding.
Is the drywall in your Ruston home worth repairing after water damage, or does it all have to come out? It depends on how far the moisture traveled. Soft, stained, or crumbling drywall usually has to be cut out, while a small dry patch can sometimes be repaired in place.
Washington Construction has been in business for 22 years, and we start every repair by finding the source of the water and checking how far it spread. Then we remove what is damaged, let the area dry, and rebuild the wall so it matches the rest of the room.
Drywall absorbs water quickly and holds it. Fixing the wall without fixing the cause only brings the damage back. Here is how local rainfall and flood risk shape the work on a Ruston home.
Daymet data for 2005-2025 shows Ruston gets about 44.8 inches of rain a year, with about 5.9 days a year of 1 inch or more. Steady rain tests roofs, flashing, windows, and siding. If a stain shows up on a ceiling or an exterior wall, the leak is often outside the wall. We look at those spots before we close anything up, because new drywall over an active leak will stain again.
The wettest single day in Ruston in that same period was 3.3 inches, on November 6, 2006. That is a reminder that a single storm can push water past a weak point. After a heavy rain, check for these signs:
FEMA's National Risk Index rates inland flooding from rivers and rain in Ruston as Relatively Low. That is a risk rating, not a prediction. It also says little about the most common cause of wet drywall, which is a roof leak, a plumbing failure, or water getting past siding. Do not rule out water damage because flood risk is low.
Once the source is fixed and the wall is dry, damaged drywall is cut back to solid material. Insulation behind it is checked. New board is hung, taped, textured, and painted to blend in. Pre-1978 homes may have lead paint, so that is considered before any sanding or demolition starts.
A very small city on Commencement Bay surrounded by Tacoma and Point Defiance.
Removal of swollen, stained, or moldy board; moisture-source checks to stop recurrence; thorough drying before rebuilding; moisture-resistant replacement board; finish matched to the surrounding wall or ceiling