Strong Foundations. Superior Results.
Exterior trim installation that frames windows, doors, and corners with durable, weather-ready detail.
You may have noticed gaps at the corners of your siding, paint peeling along window casings, or soft spots in the boards under the eaves. Trim like this is easy to ignore until water finds its way behind it.
Exterior trim installation covers the boards that frame windows, doors, corners and rooflines. Washington Construction gives free estimates, so you can have the trim looked at before you decide how much of it needs to be replaced.
Trim is one of the first places a house shows moisture trouble. It sits at the joints where siding meets windows, doors and roof edges. Those joints are where water tends to collect and where caulk and paint wear first.
Rain is the main factor in Algona. Daymet data for 2005 to 2025 shows about 109 days a year with 0.1 inch or more of rain. The same data shows that 82% of the year's precipitation falls from October to April. So trim here spends many months getting wet and often has little time to dry out fully.
When a board stays damp, paint fails and the wood can swell, split or rot. End grain and cut edges soak up the most water. Gaps at the joints then let more water in behind the board.
The wet season affects timing. Exterior work needs dry surfaces for priming, painting and sealing. Many homeowners aim to have trim work done in the drier part of the year, so the new boards can be sealed before the rains return. A free estimate is a good way to plan for that.
Installation usually begins by removing the damaged trim and checking what is behind it. If the sheathing or framing is wet or soft, that needs attention before new boards go on. Then the new trim is cut, fitted and fastened. Cut ends and edges are sealed, joints are caulked, and the trim is primed and painted.
Details matter at each step. Flashing above windows and doors helps direct water away from the trim. Tight, well-sealed joints keep water out of the wall. Material choice also matters, and your options can be talked through during the estimate.
Because Algona has about 984 homes, it is a small town, and every house differs in age and siding. Looking at your own trim in person is the only reliable way to know what it needs.
A small city in south King County near the Green River valley, bordered by Auburn and Pacific.
Defines and sharpens the home’s exterior; Seals siding-to-opening transitions; Uses moisture-resistant materials; Integrates flashing for water protection; Boosts curb appeal and value