Strong Foundations. Superior Results.
Warm tongue-and-groove ceiling installation that transforms plain overhead space into a striking wood feature.
A tongue-and-groove ceiling is an interior job, so it does not depend on dry weather the way roofing or siding does. The better question is when your house can be put on hold. Boards need a few days to adjust to indoor air before they go up, and the rooms below may be torn up for a while. Many Gig Harbor homeowners pick a stretch when the room is not needed for guests or holidays.
This page covers how to plan a wood plank ceiling, what changes the scope, and what to expect once work starts. Washington Construction has been in business for 22 years and builds and remodels homes from its base in Bothell, WA.
Start with the ceiling you have now. Flat drywall, popcorn texture, and vaulted framing all lead to different work. Some ceilings take new boards over the existing surface. Others need the old material removed first so the framing can be checked and straightened.
About 27% of Gig Harbor housing units were built between 1990 and 2009, per the Census ACS for 2020-2024. Those homes are now roughly 15 to 35 years old. Ceilings in that age range often have texture coatings, recessed lights, and vents that were placed for a flat drywall finish. Each of those needs a decision before boards go up. Light fixtures may need new housings or extension rings, and vent covers need to sit cleanly against the wood.
The same Census data shows about 24% of units were built before 1980, and that figure includes apartments. If your home is that old, the existing ceiling may contain materials that call for testing before it is cut or sanded. Homes built before 1978 may also have lead paint. Ask about this before demolition, not after.
Other things that change the job:
Wood species and finish. Pine, cedar, and fir take stain and sealer differently, and a pre-finished board saves time on site. Ceiling height and shape also matter, since a vaulted ceiling needs more scaffolding and more careful layout than a flat one. Layout direction affects how the room reads, and it affects how much material is wasted at the edges.
Expect the boards to be delivered early and stored in the room. Installation usually follows with layout lines, nailing into framing, and trim at the walls. Finishing can happen before or after install, depending on the product. Dust and noise are part of the process, so plan to move furniture out or cover it.
About 62% of occupied homes in Gig Harbor are owner-occupied, per the Census, and the median owner-occupied home value is about $767,100 (ACS 2020-2024). If you own, a ceiling like this is a permanent finish, so the details are worth settling up front.
Practical tip: buy a few extra boards and keep them from the same batch. If a repair is needed years later, matching stain and grain will be much easier.
A waterfront city on a sheltered harbor across the Narrows from Tacoma.
Seamless, high-impact overhead wood surface; Tight, parallel joints for a crafted look; Warmth and architectural interest above; Acclimated, sealed boards for PNW stability; A standout feature that defines the room