Strong Foundations. Superior Results.
Precision caulking and sealing that keeps water and drafts out of your home’s joints.
Clyde Hill sees about 107 days a year with 0.1 inch or more of rain, based on Daymet data from 2005 to 2025. That is a lot of days for water to find a gap around a window, door or trim joint. Caulking and sealing is where that gap gets closed.
Washington Construction offers free estimates for caulking and sealing work. Below is how the job usually goes, and which local details affect what you should check and plan for on your own house.
Caulk is a small part of a house, but it sits at the joints where water tries to get in. Here is how the work generally runs.
With about 107 days a year at 0.1 inch of rain or more, exterior joints stay wet often. Sealant needs dry surfaces to bond well, so timing matters. Dry spells are the better window for exterior work, and wet-weather months can limit what is practical outside. If you see staining, soft trim or peeling paint near a joint, mention it. Those can point to water getting in for some time.
The Census ACS for 2020 to 2024 shows about 66% of housing units in Clyde Hill were built before 1980. That figure includes apartments, so it does not describe any single home. Still, if your house is older, the original caulk and trim may be well past their service life. Homes built before 1978 may also have lead paint on trim, which changes how old material should be prepped and removed. Ask about this before scraping or sanding.
The forecast zone that includes Clyde Hill had 33 high and strong wind episodes from 2005 to 2025. Wind-driven rain pushes water sideways into seams that normally stay dry. Pay extra attention to the sides of the house that take the weather, and to joints around windows and where trim meets siding.
A free estimate is a good time to walk the exterior and decide which joints need attention first.
A small, primarily residential city on the Eastside between Bellevue and Lake Washington.
Seals joints against water intrusion; Reduces drafts and energy loss; Uses sealants matched to each surface; Protects against moisture damage; Freshens the finished appearance